| | These prices are the basic prices,, your guitar could be more,, could be less,,, and for me it is more importaint that your guitar is fixed. If you don't have the money for the job,, talk to me,, we can work something out | For pick up at your house in san jose and delivery to san carlos,, then back to your house,,call Lazaro Express,,8376-3288, very safe and secure, fast and not to much$$$ | Prices in colon are based on the dollor,, since they change everyday,, do the exchange rate for that day and get the price. |
 | Fret Dressing & Leveling | Worn or uneven frets can be leveled in most cases, if there is enough fret left to work with | $100+fret wire if needed ¢50,000 |
| Fret job | If the frets have deep groves or flat on top from playing, and are to worn out to do a fret dressing, the frets need to be replaced. and any size fret wire can be used so if you have medium wire now we can change it to extra jumbo or anything you want. only the best wire is used so they will last you a lot longer than the stock wire that came on the guitar. nickel-silver, gold or stainless steel | $120 without binding $200 with binding ¢80,000- ¢120,000 Acoustic $300-¢160,000 |
 | Twisted neck? | I can take out the twist on most necks, sometimes i can do it on the fret board, sometimes i need to replace the fret board and take out the twist on the neck if you have binding on the neck you might loose it, same with the inlays,,, i can replace them,, but costs more. | $200+fret board with binding and inlay replacment, more. ¢150,000+ |
 | Carbon Fiber Rods | you got a weak neck??? to much bow??? can´t get the action where you want it??? I can Insert these into your neck to stiffen it up. most of the better basses have them,,,,all the guitars I make have them.. | $75 ¢30,000 |
| Set-Up (Calibration) | Includes: Neck adjust,action adjustment at nut and bridge, adjust tremelo, minor fret work, cleaning and polishing frets, pick up height adjust, intonation done with strobe tuner, | $70+parts if needed,$85 for Floyd rose ¢25,000 fixed bridge ¢30,000 fender trem. ¢35,000 with floyd rose |
 | Pro Set Up | Same as above, but spend a lot more time working on the action and tremolo radis to match the neck, most floyd rose tremolos don´t match the neck. | $70+$20 per hour ¢30,000 + 10,000 per hour |
| Neck reset | If your action is really high and the fingers are bleeding, reset the neck so the action is where it should be, most acouctic guitars will need this in their lifetime, buy a martin guitar, they will do this for free. | $400 ¢200,000 |
 | Scalloped Necks | If you want that Yngwie look and want to bend a lot easier, this might be what you are looking for | $300 ¢150,000 |
| 
| Custom Pickguards | Anything you want | Call for price |
 | Nuts & Saddles | I can make a nut with Vintage Bone, Black buffalo horn, 20,000 year old Mammoth Ivory, Graph Tech, Slip Stone for tremelos and string benders also Brass and Stainless Steel Saddles can be Bone or TUSQ for under saddle pick-ups and Micarta, a good Synthetic substitute | $50-80+ set-up ¢35,000 + |
| Compensated Nut | White is Bone black is Earvana, compensated nuts correct the tuning problems that guitars have, if it bothers you that the cords up by the nut are never in tune,,then this is what you need | Bone-$150 Earvana is $75+ set-up AUTHORIZED BUZZ FRITEN TUNING SYSTEM $140 + set-up |
| Threaded Inserts | Threaded inserts will improve sound and sustain, let´s your bolt on neck sound like a set neck | $50 ¢25,000 |
 | Headstock Repairs | Glue, finish touch-up. Repairs often not visible | $150-200 ¢50,000-75,000 |
 | Under Saddle Pickup Install | Cut out for Pre-amp and fit and re-size saddle and rout saddle slot. | $75-150 ¢30,000 |
| Pick-up changes | Change pick-up with another brand,type or add. body routing extra | $50 per pick-up, body routing $50 per hour ¢20,000 + |
 | Electroincs | Replace bad pots and switches, add switch or blend pot to let you do any combo of pick-ups, add pizo to electric guitars to give it a acoustic output. all made in USA,,, no china crap | $50 per hour ¢10,000 per hour |
| Strings | This is what I have in the shop. If you want something else, I can order anything you want. | Depends on the strings, but cheaper than you will get anywhere else |
 | Stainless Steel Screws. All Sizes. | We can replace all of your old, ugly, nasty, rusty, screws with nice forever looking good stainless steel ones. Pickguard, pickups, locking nuts, all of them | ¢500 $1 per screw. cut and sized to fit you guitar. |
 | Handmade Brass string locks | Brass string locks will improve your tone and sustain. It'll look better than your old rusty, crusty ones. | ¢10,000 for a set of six |
| Picks,, Plastic | I have dunlop Jazz 3,,,nylon standard 1.0mm,,.88mm,,.73mm,,.60mm and bass picks | 3 for 1,000 nylon, jazz is 2 for 1,000 Bass picks are 1,000 each |
 | Brass picks | Brass picks sound great, very clear ringing tone. these are made from Zildjian A Custom Thin Crash cymbals ask your drummer. These are for pro players, if you don´t have good control of your picking, you can scratch the finish | jazz 3, 3,000 "normal" 4,000 triangle 4,000 |
 | Custom Cables | custom cables, any lenght you want. connect cables for pedals,,1 foot- 3 feet-20 feet guaranteed for life switchcraft jacks belden cable | 1 foot-10,000 3 feet-20 feet 10,000+500 per foot |
| Binding | Your guitar didn´t come with binding? Add it now! White, Cream, Black, or any kind of wood. really makes the guitar look nice, need to do a fret job + calibration, if you are going to do a fret job, is a good time to do this. | ¢100,000 for the fret job, 60,000 for the binding+ 30,000 for the calibration |
| Schaller Parts | When the best is what you want, then you want Schaller, made in Germany | |
| Guitar cases and equipment road cases | Need a case for your Kelly or Randy or King V??? Or even a "normal" guitar??? amp and equipment. you can drive over them with a truck and still have a guitar. | guitar cases start at $300 for basic case, $400 for ATA case. road cases depends on size |
| Copper Shielding | Got noise? With copper shielding you will not have anymore hum. i use copper foil tape or paint, both work good, tape is best. | $50-75 ¢40,000 |
| Custom Inlays | Nothing makes a guitar stand out like inlays. I use different types if materials,,from mother of pearl to gold. and almost anything in between. | $100-500 plus cost of material ¢55,000-250,000 |
| Custom paint | I can paint allmost anything you can think of,,, is not fast,,, some of the different types take longer to cure, 2 part urethane takes 2 days,,nitro cellulose lacquer takes 3-4-6 months to dry before i can polish. 20-25 coats of paint, 25 coats of clear, this not your factory finish. you can´t buy a factory guitar with this kind of paint job. | $200-$500+ depending on what you want |
| Custom Guitars | I can make you almost anything you can come up with, any hard wood from around the world and any scale or your own. any pick-up and hardware choice. why fix up a guitar to make it yours when you can have a one-off. Bass and double and triple necks, 4,5,6,7,8 strings and fretless, set neck, neck thru the body and bolt on. | $3,000-$10,000 ¢1.5mil-6.0 mil |